Technical Description of the Infrared Laser used on the World Trade Center 9/11

Technical Description of the Infrared Laser used on the World Trade Center 9/11







This short technical paper presents the basic technical description of an Infrared Laser that was used on the World Trade Center on 9-11-2001. The Laser sits in geosyncronous orbit at 22,000 miles altitude, is a large satellite and is likely still near the same orbit. The laser operates in the infrared frequency spectrum, below visible light. It can be operated in pulse mode or direct mode. In pulse mode, it uses harmonics of the Lighthouse Frequency to obtain a molecular time-field that impinges on everything in its path. This energy field rapidly advances all molecules forward in time, possibly more than 1000 years for each second of time, in our terms. This explains the steel beams turning into dust as they fell – seen in numerous videos at drjudywood dot com. In direct mode, the laser probably operates at 256*1.039 THz = 265.984 THz, which is a strong harmonic in the infrared spectrum (although it could operate at any of these harmonics in the infrared spectrum). Each reader must comprehend that our universe literally blinks, off and on, at 1.039 trillion cycles per second. Reference ICAACT.org and “Satellite Terrorism in America” by Dr John Hall.



buy now



Engineering Technology




Leave a Reply

Your email address will not be published.